Quantcast
Channel: Stringing - Lacrosse All Stars
Viewing all 230 articles
Browse latest View live

Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again

$
0
0
Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again

Setting a Tie Up Tuesday record, Salty Strings is back for not a second, but a third visit after sending Epoch another unbelievable custom pocket.

Tim Roche from Salty Strings is the creator of this pocket called the Paracord Pocket. We have seen pictures of this head before, but when receiving this head in the mail, we were blown away by how incredible it looked.

Tim has been stringing heads since he was about 10 years old and through all of his experience claims that this type of pocket is one of the toughest he has ever had to string. The different combinations strings allows you to achieve a unique feel on the ball.

Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again

Tim uses black sidewall string, white and green crosslace, and white shooting string to tie up The Hawk. This Paracord Pocket sits nicely near the top of the head, suiting nicely with The Hawk’s High Pocket design.

The interlock seem like a nightmare to string, but Tim nails the pattern and the colors for a clean design. From every detail of this pocket, including the large unique tail, this pocket is outside the norm.

Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again Tie Up Tuesday: Paracord Pocket, Salty Strings At It Again

You can learn more about the crafting of this pocket by checking out our first Tie Up with Salty Strings!

You can view more of Tim and Salty Strings on their YouTube channel and be sure to give them a follow on Instagram and Twitter! Contact them directly for custom stick-work.

What are your thoughts on the Paracord Pocket? Does this look like something you could string up one day? Comment and let us know below.

Live. Play. Be.
Team Epoch


Tie Up Tuesday: All Tied Up – Epoch Lacrosse Looks Back

$
0
0
Tie Up Tuesday: All Tied Up - Epoch Lacrosse Looks Back

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! We’ll let Epoch take it from here…

Epoch Lacrosse has a growing collection of Tied Up heads and through Tie Up Tuesday, that stockpile has been multiplying!

As the Tie Up collection continues to grow, Epoch wanted to give a shout out to everyone that was able to do a live #EpochTieUp, a sit-down Tie Up in Studio 22 or sent in a pearl to be a featured head.

We like to think that it’s always great to bring out friends into the studio to watch their stringing techniques firsthand and to talk shop.

Here’s some of our favorite Tie Up Tuesday features from the previous rotation around the sun:

Epoch Lacrosse All-Stars

There were too many great posts to list them all, but we tried to provide a wide variety of pockets and stringers to prove that anyone, and everyone should attempt to get creative while stringing lacrosse sticks!

Want to have your voice heard? Please answer a few Q’s for us in the comments below… Who was your favorite stringer featured in an #EpochTieUp? Did you pick up any new techniques? Who should we feature in an upcoming Tie Up Tuesday?

Live. Play. Be.
Team Epoch

Tie Up Tuesday: Zack Dorn, World Record Pocket

$
0
0
Tie Up Tuesday: Zack Dorn, World Record Pocket

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! We’ll let Epoch take it from here…

Earlier in the year, the crews at Universal Lacrosse and Epoch Lacrosse joined forces to bring perfectly strung Zack Dorn replica pockets to the lacrosse world!

Epoch athlete Zack Dorn is the world record holder for the fastest lacrosse shot. Today we feature the pocket Dorn used to break the record, with his rip coming in at an insane 117 mph.

The Hawk was engineered with it’s famous high-pocket design for the ultimate quick release. Considered as one of the most advanced heads on the market, it’s a no-brainer why Zack is breaking records with it!

Tie Up Tuesday: Zack Dorn, World Record Pocket Tie Up Tuesday: Zack Dorn, World Record Pocket Tie Up Tuesday: Zack Dorn, World Record Pocket

The colors were hand selected, using red white, and a lighter shade of blue used for the shooting strings and sidewall strings a tribute to Dorn’s city and lacrosse club, the Chicago Outlaws.

This head and pocket has all around an awesome, clean look and can obvious rip some twine.

Tie Up Tuesday: Zack Dorn, World Record Pocket Tie Up Tuesday: Zack Dorn, World Record Pocket Tie Up Tuesday: Zack Dorn, World Record Pocket

With a pocket like this, maybe you can shoot in the triple digits?! Pick up a Zack Dorn replica head for yourself from Universal Lacrosse and get the radar guns ready!

Live. Play. Be.
Team Epoch

Tie Up Tuesday: Throne of String – Zack Dorn GuacBomb

$
0
0
Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! We’ll let Epoch take it from here…

Good news, everyone! Throne of String dropped off a doozy at Epoch HQ for this week’s Tie Up Tuesday.

Last go around, we showed you the Zack Dorn replica pocket and told you how to get one for yourself! Once again, Epoch athlete Zack Dorn, the world record holder for the fastest lacrosse shot, is the inspiration, this time we show off what Zack is using.

Feast your eyes on this amazing custom dyed head and pocket, crafted in honor of his passionate love for Chipotle, hence the name, Zack Dorn GuacBomb.

The Hawk is custom dyed black by Throne of String with vinyl decals covered in a chrome finish, giving it a really metallic, polished look.

Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb

The pocket has a variety of color using light blue and white for the shooting strings, light blue sidewalls, and custom colored red and white Throne mesh.

These colors with the black chrome head make a great looking unique head.

Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb Tie Up Tuesday: Throne of String - Zack Dorn's Guac Bomb

What are your thoughts on the Zack Dorn GuacBomb? What do you think of the custom chrome head? Comment and let us know your thoughts below.

Live. Play. Be.
Team Epoch

Tie Up Tuesday: American Marc Mesh, Blue Collar Lax

$
0
0
Tie Up Tuesday: American Marc Mesh, Blue Collar Lax

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! We’ll let Epoch take it from here…

Just recently Epoch Lacrosse received a really cool dyed pocket from the guys at Blue Collar Lax and we just had to feature it as today’s Tie Up Tuesday.

Ironically, Blue Collar Lax out of Canada sent us the most American patriotic pocket we have seen on The Hawk. They custom dyed a solid blue square with a red and white striped pattern on the Marc Mesh to replicate the American flag in a unique, almost moving, fashion, which turned out great!

Tie Up Tuesday: American Marc Mesh, Blue Collar Lax Tie Up Tuesday: American Marc Mesh, Blue Collar Lax Tie Up Tuesday: American Marc Mesh, Blue Collar Lax

The diagonal direction of the design adds to the interest of the pocket. Keeping the head a fresh white and only dying the pocket makes this tie up a very clean look.

We think the final product was an awesome job by Blue Collar Lax! What are your thoughts on the American flag styled pocket? Is there anything more creative they could of done to make this pocket really stand out?

Visit the Blue Collar Lax website for more on Marc Mesh!

Live. Play. Be.
Team Epoch

 

Floating Pita Pocket – Traditional Thursday

$
0
0
floating pita lacrosse stringing5

I first saw a floating pita pocket about 15 years ago. It was being used by a Long Island guy named Jay Spatafora, who had just finished up two years at Nassau CC, and one of his friends from out on the Island had been putting together his sticks. They were unlike anything I’d ever seen, and being a novice stringer at that point, my mind was blown.

He had two of them, one was almost brand new and needed to break in, while the other was the most perfectly dialed in traditional stick I’ve ever seen in my life. That was true back in 200o, and while I’ve seen a LOT of traditional pockets since then, it’s probably still true now. That pocket was legend!

Now that I can pretty much string anything I want, I figured it was high time to share this pocket with a broader audience, and supply some tips I learned along the way to help you out.

Materials Used: Brine King HS head, Throne of String leathers, homemade flatlace, StringKing sidewall and shooting strings.

The basic premise is that the sidewall strings attach to the plastic of the head only at the top and bottom of the pocket. This allows the sidewall strings to be pulled inwards, and for the pocket to sort of wrap, or fold, around the ball when it is in the pocket.

floating pita lacrosse stringing5

While the pocket looks like a basic pita, it does have some weird kinks to it, so it’s not quite as simple as just stringing a traditional pocket like you usually do. As with all traditional pockets, proper tension in your strings is key to a great pocket, but as this one can move around on you a bit more, precision is extra important. TAKE YOUR TIME STRINGING ONE OF THESE. I’m yelling because I’m serious.

Floating Pita Stringing Tips

Tip 1 – Keep the sidewalls TIGHT

As you can see in the photos, the sidewall seems to sag, and give the pocket extra depth, but you do not need to put in any extra sag yourself, it will happen on its own. String your sidewalls as TIGHT as you possibly can. As they settle in and knots slip a little (natural and more or less unavoidable), they will sag all on their own and you may need to actually tighten them up again. So let it happen on its own, and keep your sidewalls tight.

floating pita lacrosse stringing5

Tip 2 – String the pocket tightER

Do not string a TIGHT pocket, but think about making your stringing and knots just a little more TAUT. Those two words do not mean the same thing. Look up the difference if you don’t know it already. At first, the pocket will seem shallow, but as the sidewalls sag, you’ll be glad you went with the taut stringing. If not strung properly, these pockets can whip out like crazy.

Tip 3 – Can I use a Traditree?

Yes, this definitely can help you string one of these. One note here is that since the sidewall floats, the tree does not get locked into place, and can slip off the sidewalls. This can be frustrating, but can help more novice stringers get the taut pocket they need here. For more accomplished stringers, free hand will work just fine, as long as your tension is good!

Tip 4 – Lock down a couple sidewalls loops

I have seen this pocket where the entire sidewall floats, and while I like it, I have been messing around with locking down the first 2-3 sidewall connections before floating the sidewall, and I find this works incredibly well. It gives a little added structure, and creates a very consistent release point right at my lower shooters.

floating pita lacrosse stringing5

Tip 5 – Lock down your shooters

Your shooters don’t need to be super tight, but I do recommend locking them around the plastic, or through and open sidewall hole. 2-4 shooters will get the job done if you’ve strung the pocket correctly. Again, combined with the locked down sidewall, the locked down shooters provide a consistent release, and excellent hold, without adding much whip, if any.

Tip 6 – Allow break in to deepen the pocket

Don’t let your leathers out too much, or loosen your sidewalls after the pocket is done. Just give the pocket a good pound out, and then go hit the wall or have a catch. The best way for the pocket to let out is naturally, and this also allows the pocket to break in specifically for your throwing motion, which is an added bonus.

floating pita lacrosse stringing5

Tip 7 – Whip problems

First thing you can do if you’re having whip issues is to tighten your sidewalls down even more. The second place to look is for loose crosslace in your pocket, especially higher up near the scoop. The third thing to look at is your shooting strings. They shouldn’t even be TAUT, just sit them there. Not too taut, not too loose so they bunch up. Come, on Goldilocks. Finally, take a look at your leathers. You don’t need a total bag with this pocket, so take them in just a bit if you’re throwing down.

If you do all that and the pocket still stinks, tear it our and try again. Each time you string one, the end product will get better. I’ve done 4 of these in the last couple weeks and this is my best effort yet. It’s only going up from here!

This pocket is highly channeled for a traditional, gives great feel, and if you get it right, it’s a joy to behold. It’s not the easiest to string, but it’s not impossible, so get on it and share your work with us on social media. We’re everywhere!

Tie Up Tuesday: Connor Wilson, Lacrosse All Stars

$
0
0
Tie Up Tuesday: Connor Wilson, Lacrosse All Stars Hawk-it Pocket

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! This week LaxAllStars.com’s own Connor Wilson shows off his work of art…

James Miceli and crew at Epoch Lacrosse were nice enough to include me on a list of people who got the Limited Edition 382C green Epoch Hawk heads.

While many of my contemporaries threw in high mesh pockets or hung the head on their display wall, I had to take on a self-imposed challenge: String a Flip Naumburg inspired pocket in a Flip Naumburg designed head. And make it perfect. Flip takes his time with every pocket he strings, so this head deserved that same level of attention. If it’s perfect, I’ll call it the Hawk-it Pocket.

Flip is lacrosse famous for a number of different reasons, but inventing the Rock-it Pocket is as good as any, and the concept of that pocket was the inspiration for mine, with my own tweaks and twists thrown in.

The Rock-it Pocket creates a place for the ball to sit, usually right in the middle of the head, aka the sweet spot, and no matter what you do, a well strung Rock-it Pocket will hold and release the same way, and that is to say, very well. The Rock-it Pocket creates a “home” for the ball, and that ball definitely wants to go in its home. It’s not too good for its home at all.

So I totally stole the middle back and forth section from the Rock-it Pocket. I just had to. Sometimes things are just as good as they can be. And the double knotted middle channel allows for complete customization. The only change is that I used under-over double knots, whereas a Rock-it Pocket uses under-under double knots. Ok, so maybe everything can be improved on. That’s not the point.

The rest of the lower portion of the pocket is really just standard pita pocket side netting methodology, and is nothing special. One key feature is that the side leathers, #s 1 and 4, need to be relatively tight to keep the center spot for the ball, even in the key hole shaped Hawk.

But one huge difference is the top portion of the head, where the crosslace runs through the leathers. This area is very tight, and it holds the high pocket away from the plastic, to avoid lipping, even with a very high traditional pocket. It’s kind of like a coil in terms of function, but I hate coils aesthetically, and would never use one. I’m weird like that. So this was answer to the coil issue.

The end result is a pocket with incredible hold and control, a true, powerful release, and an unparalleled feel. I used grey leathers from Throne of String, and while they started out good, they turned great over time. You can pick corners, rip it from 15, and throw touch passes shovel style. I’m actually kind of proud, and more than a little surprised, at how well it came out in the end.

I took a little bit of what I know, some fundamental aspects of any good pocket, and a whole lot of inspiration from Flip to create this one.

It’s nothing ground breaking, it’s just really, really good. Phew. Self-imposed challenge complete. The Hawk-it Pocket is a thing. All homage to Flip.

Live. Play. Be.
Team Epoch

Tie Up Tuesday: The WALL of Fame

$
0
0
Tie Up Tuesday: The WALL of Fame

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! We’ll let Epoch take it from here…

Following the release of the “All Tied Up” video, we felt it was completely appropriate to also give an inside look at the Wall of Fame where we showcase all the one-of-a-kind Tie Up Tuesday heads that we get.

Everyone of these custom-strung Hawk head has its own story and plenty features we admire; like a knot, or unique shooter set up, or dye job that everyone at Epoch loves.

Because all of these craftsmen have dedicated their hands and minds to excellence, we’ve dedicated the perfect spot on each shelf to every head we receive. Each one sitting next to another, each with its own story. It’s awesome to be able to pick up each custom Hawk to learn a new knot, examine how others achieve their high pockets or to breakdown how they do their top strings.

It’s an honor in which we are grateful to give you a look at! Let us know which Tie Up Tuesday episodes were your favorite!

Live. Play. Be.
Team Epoch


Double Gear Review: Warrior Burn Head with Burn Mesh!

$
0
0
Gear Review Warrior Burn

Here’s to a tasty combination, one we’re actually giving away this week…the Warrior Burn Head with Burn Mesh!

Over the coming weeks, you’re going to be treated to not 1, but 3 Double Gear Reviews as Warrior was kind enough to send us all 3 pieces of their new mesh, along with the matching heads, to check out!

Let’s knock these out alphabetically, starting with the Burn head!

Company: Warrior / Product: Burn HS / Price: $90

Appearance – 9/10

Gear Review Warrior Burn

There’s nothing all too original about the Burn, but it is a solid merger of a lot of things Warrior/Brine has done over the years.

The Burn has a solid pinch-ready face, but with a remarkably similar sidewall shape and off-set to the Evo 4. There’s one available screw hole on the back keeping the throat right inline with the Evo.

The scoop and top hole protection is classic Warrior, with the W slapped in the scoop and all.

I like the use of the SymRail, giving a nice flare to the face. The side profile is like the Noz and Evo had a kid, and a wonderful child it is.

Stringing – 8.5/10

I’m always going to be a stickler for bottom-string holes and these pups are a bit tight. Getting leathers through without pliers is no easy task and feeding a shooting string through there isn’t fun either.

Gear Review Warrior Burn

The 19 holes up the side-walls make it a dream for forming the perfect pocket and the 6 evenly spaced scoop holes is the Warrior standard, great for creative top-strings and 6-shooters.

Gear Review Warrior Burn

Also, there’s one more sidewall hole than the Evo 4, so that’s why it earned the extra .5 (if you were wondering).

Stiffness – 8/10

The Burn is the pretty dang flexible on the pinch and the best part is the head is just wide enough to keep the ball from getting pinched in the pocket or caught up in the mesh when cradling

It flexes further back than Clutch or Evo, giving a nice little cushion on ground-balls.

Gear Review Warrior Burn

The throat is as strong as all Warrior heads and although it’s flexible, the face-shape can’t be twisted easily, again helping on face-offs and fighting against warp.

It’s not a defenseman’s dream head, but a top-notch option for the offensive-minded player.

Durability – 8/10

Gear Review Warrior Burn

The thinness of the side-walls added to the flexibility makes me a bit nervous. I didn’t see the Burn warp too much at all after plenty of twisting, but a malleability of the plastic has me believing that relativity hot or cold days could do some damage to the integrity of the head.

That said, it really doesn’t give me the feeling that it’s going to snap, so I think it’s about where it should be based on the price point.

Value – 8.5/10

Gear Review Warrior Burn

For an offensive option around $90, I think most of us can get some solid use out of the Burn. If you like the Burn, pick up a RP3 from Brine and the Warrior Evo 4 to compare the differences. This head falls right in line with those two and at three different price points, and slightly different variations. One of them is bound to be your dream head.

Overall – 8.4/10

I like the Burn a lot more than I anticipated. It might be a closer relative of the Evo 4 and RP3, but it’s a tad cheaper and offers what some would consider the right amount of flexibility for a shortie.

Head over to your local lax shop and put hands on a Burn to get a feel for yourself. It may not be revolutionary, but it will be a solid daily driver for those who wield it!

Now let’s talk about that new featherweight mesh that everyone’s all jazzed up about…

Company: Warrior / Product: Burn Mesh / Price: $19.99

Stringing – 7/10

Gear Review Warrior Burn

The feel, flexibility and weight is very similar to Otter Mesh by Epoch, which means you’re not going to experience much stretch when forming or breaking in the pocket.

The thin structure of the mesh makes it easy to bunch, but really needs to be cranked down on the side-walls to get a usable pocket. If you’re not careful and take your time thinking out the sidewall, there will be whip. A lot of whip.

Gear Review Warrior Burn

Being so thin, I recommend using a shooter at the bottom to avoid tearing the mesh. I promise this stuff strings differently from almost everything on the market, so take your time!

Ball Control – 8/10

The most noticeable attribute of the Burn Mesh is its extremely light weight. The deeper a pocket is strung, the more you will feel the ball move in the head.

The ball has a tendency to rock side to side underneath of the side-rails of the head while cradling, which I really can’t get used to. Other guys who tried out the head loved the feeling and knew exactly where the ball was at, which I understand.

Gear Review Warrior Burn

Because of the whip factor, hold is going to come naturally and without some tacky gimmick to give some extra grip. The feel could be compared to soft mesh, but cut the thickness in half. The mesh and the ball kind of go where they want at times.

Durability – 7/10

It’s light, really, really, light. Like half an ounce light. Examining the mesh closely, you can tell it’s a bit “hairy” which means it’s likely going to fray and the strings may blow out a bit.

Win a Burn Head with Burn Mesh from Warrior

You can also see a ton of tension on the diamonds when stretching and locking down a tight top-string.

They refer to if specifically as “featherweight mesh” and I can’t find anyway to disagree. I don’t expect the pocket to lose its shape, but some good scrapes on a hard surface and rigorous face-offs are likely going to put miles on this mesh a lot quicker than others.

I haven’t ripped it yet, but I also haven’t put it through a season.

Consistency – 9/10

Gear Review Warrior Burn

Seeing as it doesn’t stretch, I had no trouble reading the mesh from top to bottom. Like I said, it’s not like other mesh, so forming a pocket takes time but I’m not seeing any flaws when breaking down this mesh.

With such little break-in needed, the adjustment period should be quick. No sag, bag or water log is in your foreseeable future with Burn Mesh.

Value – 9/10

$20 for mesh of this caliber is pretty legit. For the guy who loves slinky, light and fairly affordable mesh, it’s a no-brainer.

Overall – 8/10

Gear Review Warrior Burn

Burn Mesh is a great option for anyone who needs that super-light, super-feel mesh on a budget. For $20, I hope kids give it a try. I personally can’t use something so light in my pocket, but when strung perfectly you are going to drop dimes and really feel the ball leaving your pocket.

If you can afford it, it might be worth trying out all three options from Warrior to figure out the basics of the 3 main types of mesh and decide what’s best for you. It makes total sense that Warrior hopped into the mesh game, and with one option for the “top 3” styles of mesh (high performance, wax and featherweight) we’re sure you’re going to be seeing the stuff on shelves everywhere.

The Burn combo is pretty sick and an overall affordable pickup for a high-end lacrosse head. Try to win one while it’s still up for grabs!

Tie Up Tuesday Top 5 of 2015

$
0
0
Tie Up Tuesday Top 5 of 2015

Editor’s Note: Welcome back to Tuesday Tie Up from Epoch Lacrosse! Each week, we feature a guest lacrosse personality to help you see how the big guns string their heads. You’re sure to learn a thing or two, so pay attention! This week we’ll take a look at our favorite from the year!

This week, I’m taking over Tie Up Tuesday to force my opinions upon you all. I’m picking my Top 5 #EpochTieUp episodes so far from 2015.

Without further ado, let’s get it…

#5 Connor Wilson – LaxAllStars.com

I might be a little bias, but there’s no way this pocket couldn’t end up in the Top 5. Actually, it’s my #1, but I’ll rank it at the bottom of the list because of my ties to the stringer.

The Hawk-it Pocket is one of my absolute favorites, I’ve personally replicated it probably close to 10 times or more. Well done, sir, well done.

#4 Chris Deal – Universal Lacrosse

Crowds earn points. Dealy was built a little audience at the 2015 NCAA Championships where Epoch filmed his Tie Up on location.

I’ll look past the fact he tied his fresh new Hawk up with mesh, because rocking out a traditional in a crowd like that would be a pain in the tuchus.

#3 Tony Libera – Wheaties

It’s freakin’ Wheaties, the breakfast of champs! You get a sweet tour of General Mills HQ with a ton of behind the scenes peeks at things around the Wheaties office.

It was fun and unique episode, so I was able to once again look past the mesh. It also got me mad hungry for some sugary cereals.

#2 Joe Williams – Throne of String

Gotta give it to the mad man, homie can work a crowd. The Throne booth was constantly flooded at #LaxCon and it was all because of this guy.

I had to plug Joe in at the #2 spot because of his ability to work a crowd of youngsters while knocking out a tasty bag for a live on the scene Tie Up. It was hard to put a mesh pocket so high up on the list, but the crowd factor won me over.

#1 Tim Roche – Salty Strings

Technically, Tim Roche and his Salty Strings pockets were featured in 3 separate Tie Up Tuesday episodes this year, and from his craftsmanship, you can see why!

Tim’s attention to detail, incredibly intricate pockets and ability to break outside of the mold is what earned him my #1 spot in the Top 5. I can spend hours staring at his pockets and still find something new or interesting every time!

The Paracord Pocket, The Eagle’s Nest and the 9 Diamond Fisher Pocket all deserve your time and attention. Spend today ogling Tim’s work, the man is a true artist.

NEW – 2016 US Lacrosse Women’s Rules

$
0
0
2016 US Lacrosse WOmen's Rules

Welcome to the 2016 US Lacrosse Women’s Rules!

This may come as no surprise, but the rules surrounding women’s lacrosse pockets have changed again. I am sure that to some of you, this may be the equivalent of me announcing that the ocean is really salty, or that Christmas will be held in December this year. However, some of you may end up needing a whole new pocket, and since that is literally my business, let me lay out the specifics for you.

Here at Stylin Strings Lacrosse, we have learned that rule changes such as this all boil down from the rules committee, to the education given to your local referee organization, and finally to the individual referee that is officiating each game. Every rule change goes through this process of multiple interpretations and understandings, which eventually coagulate into one universally accepted understanding.

Rule changes can be as dry as California so please bear with me as I try to make this all as easy as possible, while giving you the best interpretation my experience can offer.

Please note that the existing rules are more in-depth than what we are discussing here. We intend to discuss new rules and regulations. The text in blue will represent the language provided by the US Lacrosse Women’s Game Committee. Our interpretation is represented in red.

2016 US Lacrosse Women’s Rules

Section 8: Each attachment to the sidewall shall be no more than 1.5 inches from its adjacent attachment when measured in a straight line from hole to hole.

This can be interpreted as saying that each sidewall string hitch must be no more than 1.5 inches from the one you have just tied. The intent here is to limit the hold a stringer can add to the stick through creating suspension. If a sidewall hole is skipped and a “hanging sidewall” is enacted, the pocket will have more “give” as pressure is applied from either catching the ball or power cradling (which generates pressure in the form of g-force)

2016 US Lacrosse WOmen's Rules

Section 20: The pockets of all field crosses shall be strung with four or five longitudinal leather and/or synthetic thongs. Mesh pockets are not allowed. Longitudinal leather or synthetic thongs and/or other second material shall be 0.3 cm to 1.0 cm wide. Each thong must be made of one material (leather, synthetic leather or nylon cord) and run the full length of the head.

The material requirements are nothing new, and really they are not all that restrictive. The term “Synthetic” leaves the door open for a lot of innovation. The statement of needing to “run the full length of the head” is one to pay attention to. Many manufacturers will need to change their stock pockets. The tie off methods of punching a hole in a leather and tying it off with cross lace through the bottom string may, or may not, be considered an infraction of this rule.

If you read the wording, one may conclude that as long as the longitudinal thong is the length of the head, even though it may not appear so when the pocket is fully extended (in later rules you will read about the minimum length measurements that will likely negate this point in most instances.), it may be considered legal. I believe that if the runner is undoubtedly longer than the full length of the head then a string tie off would work fine, but then what is really the purpose of a string tie off at that point? We will have to wait and see what interpretation ends up becoming the norm, but to be safe, make sure your thongs extend fully through the stick, and avoid string based tie off methods.

I admittedly have no idea what this rule is intending to solve. My best guess is that someone had some experimental thong that drastically fell short of running the full length of the head. Maybe someone made something no one else saw that blew the lid off of pocket making! Probably not.

image6-STYLIN-STRINGS-WOMAN-2016-RULE-CHANGE-CUSTOM-LACROSSE-POCKET

Thongs must nominally be the same width along their full length. Thongs must be attached to the head through holes in the scoop and at the ball stop. A second material may be used to allow attachment to the scoop and the ball stop of each thong to the head. However, this second material may not be more than .5 inches from the scoop and no more than 1.5 inches from the ball stop.

Going back to our prior point, we can see that there is still an opportunity to use string tie off methods. Make sure that when doing so, your runners “run the full length of the head. Pay attention to the measurements (.5 from the top, and 1.5 from bottom) as this will probably be an easy point for the referees to detect and enforce. Also, the distance afforded here could be good for creative innovation.

This following point is aside from the rules. As a stringer, I want to make a point that if your runner must run the full length of the head, then just tie the runner through the bottom holes. It is stronger, safer, and leaves you with more adjustment capabilities. Also, you get all of these benefits with less work. A Stylin’ Strings Lacrosse rule of thumb is to never cut a leather when you do not have to.

image6-STYLIN-STRINGS-WOMAN-2016-RULE-CHANGE-CUSTOM-LACROSSE-POCKET

The thongs at the ball stop must extend 5.1 cm beyond the ball stop.

This is going to be an issue for many stock pockets coming from manufacturers. We string everything with full length durable Stylin’ Strings approved leathers. Manufacturers heads tend to use shortened leathers. If you have a head that was not strung by a professional stringing company, restrung by yourself via a kit (not a kit from a manufacturer), or had your pocket restrung from a well educated independent stringer, then you may be in a little trouble here. It is my understanding (which is subject to change as the interpretations solidify within the community) that the string tie offs will not count towards the 5.1 cm minimum.

STX pockets such as the runway should be fine in regards to this rule. Their use of synthetic thongs leaves for excess string. I personally do not support this methodology from a stringer’s standpoint, however it is good to go in regards to this particular rule. Manufacturer pockets that may be infraction of this rule are Debeer, Under Armour, and some Brine heads (but not many). PLEASE KEEP IN MIND THAT THESE MANUFACTURERS ARE NOT LIABLE. When these pockets were strung, the rules were different. They made their pockets with a keen understanding of the rules and regulations of their time. Do not feel cheated.

Thongs must not be bunched along the width of the head (top to bottom) and may not be more than 1.5 inches apart as measured from the inside of adjacent thongs, regardless of the material.

Lets talk Center Channels. Centers are the topic most people are concerned with these days. It makes for most of the utility a pocket offers. Most of us expected some straightforward changes to the rules regarding center channels, and instead we got this very reasonable regulation. The channel cannot be more than 1.5 inches from thong inside to thong inside. This goes for all channels, and not just the center. I do not see any manufacturer strung pocket being illegal on account of this particular rule.

The statement of the thongs not being “bunched along the width of the head” is one that we are still trying to figure out. I am not sure we have ever bunched anything, nor have I ever seen anything that could be determined to have been “bunched”. So for this little tidbit, we will have to wait. If we get a follow up we will clarify as to what this means.

The loose ends of the thongs may not be woven back up through the pocket or the sidewall of the crosse. The loose ends of the thongs must remain below the ball stop.

This means, first and foremost, no wrap around end methods. Put the leathers or synthetic thongs through the bottom string holes directly and you should be good to go. Also, if you have been weaving your leathers back through your pocket for some reason, knock that off.Any additional strings used for attachment of the pocket to the head of the crosse may not be tied behind the pocket above the ball stop.

This is where some of the rules get contradictory. Can we have string tie offs or not? The best approach I can suggest is to not use this method, but if you are a devout follower of punching a hole into the leathers and stringing them through the bottom holes, then you may want to string yourself a back up that does not utilize such stringing techniques. The final understanding of these rules will come out in the wash, but for right now prepare yourself. Many stock pockets are strung this way.

Additional strings not directly required for attachment of the pocket to the head of the crosse are not
allowed.

If it is not needed, you cannot have it. It is cut and dry. No extra pieces of string, no aesthetic add-ons such as beads, ribbons, or the like. If it’s not part of the pocket it has to go. If you have something that is unconventional strung into your pocket, you may want to start having your coach rehearse his or her speech to the ref as to why it is “directly required”, or ditch it.

image6-STYLIN-STRINGS-WOMAN-2016-RULE-CHANGE-CUSTOM-LACROSSE-POCKET

Section 23: The nominal diameter of the shooting/throw string (hereinafter “shooting string”) nylon cord and sidewall nylon cord shall be 0.3 cm maximum. The nominal diameter of pocket nylon must be less than 0.3 cm.

Your average women’s shooter is within this size range. I took the liberty of measuring all the ones we have in our stringing studio (which spans 4 manufacturers) and they all were within regulation. I did this to ensure that the standard string, regardless of who is making it, is probably within regulation. If you are using something larger, it will have to go, but I assure you that it will not be hard to find a replacement.

Section 25: Any shooting string must be directly attached to both sidewalls in the upper third of the head, or, the top shooting string must be directly attached to both sidewalls in the upper third of the head and the bottom shooting string may be an inverted “U” in shape and must be directly attached to both sidewalls in the upper two-thirds of the head, as measured from the top outside edge of the scoop (Diagram 15).

This is a long standing rule. If you have any questions as to the legal areas of the shooters, please review the old rule book. The spacing language is not new, but the language of where the shooter must be attached is, “attached to both sidewalls” will most likely mean that the string MUST go through the plastic sidewall.

Many stringers use an independent sidewall string (which I highly suggest) and it should be noted that the rules committee and the local referees would most likely be using the term sidewall to reference the plastic holed sidewalls and not the independent sidewall string.

image6-STYLIN-STRINGS-WOMAN-2016-RULE-CHANGE-CUSTOM-LACROSSE-POCKET

So there are the main changes for this year. It is important for me to send you off with the reminder that women’s pocket rules are extensive. If you have never thumbed through the US Lacrosse rule book then you really should not be stringing sticks for women players. The penalties for illegal sticks are terribly harsh and referees are trained to be scrupulous.

If you need any pocket stringing services please feel free to review our offerings online by using the link below. Use code “LASWEEK1” for 10% off of your next women’s pocket until November 30th 2015.

image7-STYLIN-STRINGS-WOMAN-2016-RULE-CHANGE-CUSTOM-LACROSSE-POCKET

Goalie Mesh Review by Van O’Banion

$
0
0
goalie-mesh-review

Editor’s Note: Welcome to a Goalie Mesh Review, written by long-time stringer Van O’Banion! Van has been around the stringing game for what seems like an eternity, and has been around long enough that Connor (old man that he is) learned a TON from Van’s old tutorials. It’s all true. Check out what Mr. O’Banion has to say about that all-important goalie mesh!

Goalie Mesh Review by Van O’Banion

I have excluded all Micro, Soft, and Hard 17 diamond and 20 Diamond Mesh due to the fact that very few lacrosse goalies are using them anymore. Maybe innovation can change this fact, but for now we are focusing on what matters most, which is the 12-diamond goalie mesh, which currently dominates the market. For this Goalie Mesh Review, I looked at the following four types of 12 diamond mesh*:

  • East Coast Dyes 12 Diamond Goalie Mesh
  • JimaLax 12 Diamond Goalie Mesh
  • Throne 12 Diamond Goalie Mesh
  • Stringking Grizzly Goalie Mesh

*Disclaimer: Stylin’ Strings only uses the highest quality stringing materials in our pockets. This article is an informative comparison meant to educate players on the differences between the various offerings of mesh so that they can make an informed decision when choosing their next pocket. At the end of the day, there is no winner, just four different options to choose from.

Ranking System – Numbers 1 to 5 are used with “5” being the best rating.

Overall unique points for each mesh piece:

  • East Coast Dyes             Soft, Light, & Wax Coated, Large Diamonds
  • Jimalax                             Hard Coating, Large Diamonds
  • Throne                                Wax Coating, Smaller Diamonds
  • StringKing Grizzly       Ultra-light, Non-coated, Large Diamonds woven from FlexLite™                                                                   fibers to control stretching.

Categories Reviewed:

  • Rebound                      The amount of give a goalie pocket has directly affects how the                                                                    ball will project after it hits the mesh at a high velocity
  • Longevity                    The length of time that the mesh will last, also known as                                                                                     durability.
  • Ease of Stringing        The degree of difficulty using the mesh to make a functional                                                                             channeled pocket with the correct amount of whip.
  • Break In                       The time and effort it takes to form and soften the mesh to the                                                                         peak of its life.
  • Maintenance               The amount of time and difficulty to keep the pocket with correct                                                                  whip, and shape. 

East Coast Dyes

goalie-mesh-review

  • Rebound                      5 /5 A Large diamond wax coated mesh. When strung properly, with a           deep pocket, will mold and slow down the ball when contact is made resulting in less rebound.
  • Longevity                    5 / 5 The wax coating on the mesh provides little to no abrasion which               bodes well for goalies. A big time D1 goalie for the 2015 season used the same piece of East Coast mesh in the beginning season as the end. We saw it with our own eyes.
  • Ease of Stringing        2.5 / 5 The diamond size mixed with a wax coating makes this mesh             difficult to string correctly. It can lead to anything but a low pocket to whip out easily.
  • Break In                      5 /5 Wax coated, yet very easily stretched. It does not take much                 work to form your perfect pocket.
  • Maintenance               2.5 / 5 The thinner of the wax mesh repels dirt and moisture however               bags out quite easily. The mesh changes over time requiring constant maintenance. We have done this for many goalies over the summer at tournaments.

Throne of String

unnamed-1

 

  • Rebound                      4.5 / 5 A thick wax coated base of mesh. Due to the thickness of the wax and size of the diamonds doesn’t give as well as other mesh when hit with a ball at a high velocity. However this difference is minimal and the overall quality makes this mesh one of the tops in the industry.
  • Longevity                    5 / 5 This mesh receives the highest rating due to it’s similar qualities             to Jimalax 12 diamond, as well as the thick wax coating which has created a time tested sturdy mesh that we personally have never seen rip or break.
  • Ease of Stringing        4 / 5 This wax coated mesh is very easy to stretch as well as great for all goalie heads. We did not give this a 5 due to the wax coating getting on other strings and hands while creating the pocket.
  • Break In                      5 / 5 Wax coated yet very easily stretched. Does not take much work to form your perfect pocket.
  • Maintenance               4 / 5  The thickness of the mesh and wax coating gives this mesh a great score. It doesn’t stretch much or bag out lending to a very low maintenance pocket.  

Jimalax

unnamed-2

 

  • Rebound                      3 / 5 A Hard, coated mesh is stiff and durable. It can be molded and strung into a great channel, however isn’t as soft and intensifies the rebound effect. However a great stringer can offset the stiffness and rebound attributes.
  • Longevity                    5 / 5 This mesh receives a 5 due to the fact that we have never seen it break or tear. Wearing will happen to all mesh but we know this mesh will out live any goalie head on the market.
  • Ease of Stringing        2 / 5  “We would give this mesh a 3.5 for the white color only” however there is no consistency between the colors and it is the only mesh on this list with a “add water attribute”, meaning you need to soak it before stinging into a pocket.
  •  Break In                      2 / 5 This hard, coated mesh has a difficult break in process due to it’s stiffness. It requires soaking, constant stretching, and a hefty amount of wall ball and “elbow grease” to get this mesh to it’s prime age.
  • Maintenance               3 / 5 The hard coating on this mesh eventually wears thin and softens. This makes the pocket change over time requiring adjustments to the sidewalls as well as the shooters to keep the pocket performing at it’s best. 

StringKing Grizzly

 

 

  • Rebound                      3.5 / 5   Ultra-light, soft, non-coated and durable, resulting in a serious lack of give. Not the best option for all goalies so it doesn’t get the highest rating.
  • Longevity                    2 / 5 *This is the rating for the first series of Grizzly 12 diamond goalie, since the study StringKing has re engineered their mesh. With that being said this original mesh was created placing too much value on being lightweight, which in turn does not increase the mesh’s durability. We have seen quite a few cases of the mesh ripping from taking high velocity shots.
  • Ease of Stringing        4 / 5 Grizzly mesh is easy to string in all goalie heads. It also stretches quickly to maximum depth as well as very easy to maintain correct whip.
  • Break In                      5 / 5 Non-wax coated and pretty much broken in from the minute it is strung in your head.
  • Maintenance               4 / 5 This mesh does not stretch much after being strung into a stick meaning it doesn’t bag out so there isn’t much adjusting needed to keep the shape and whip intact. The fact that we have seen this mesh rip and witnessed goalies constantly using string to repair any tears in the mesh brings the overall grade down.

Now you want to buy some of this mesh and try it out? Here’s 10% off.

stylin-strings-lax-allstars-discount-code-3

We hope you found this goalie mesh review to be informative and helpful! See you next time.

Best Lacrosse Stick You’ll Ever Have

$
0
0
It's the Wizard Not The Wand pick up your best lacrosse stick

The best lacrosse stick you’ll ever have? It’s out there, and you need to find it. Or do you?

There is an old video on YouTube, where Mike Powell is talking about, or more accurately, following around “his” lacrosse stick. I can’t find it online anywhere, but the general idea was that you didn’t always find the best lacrosse stick, sometimes it found you. In the end, there was really only one stick that was yours. You might have multiple sticks, but only one truly felt right in your hands.

Reece O’Connor DID find the video! Well done, sir! So just watch it…

(Check out more great videos over on Rhino Vision!)

The cool visual of a floating stick notwithstanding (an excellent use of fishing line!), Powell’s message is so on point it’s scary. There really is only one stick out there for each player of this game.

Now, you may be saying that I’m being a complete hypocrite here, because in the past I have argued that any good player should be able to pick up any stick and use it well. I have also said that by using multiple sticks, players will not get bogged down in the motion that works best with their ONE stick and will therefore become more diverse players.

So which is it? Do you have one best lacrosse stick, or do you use multiple sticks? Turns out it can actually be both. Using different sticks and pockets on a regular basis is one thing. Using “your stick”, commonly referred to as a “gamer”, every time you play competitively is another thing. I’ve refined my view, and know you can do them both, and you don’t even need to own multiple sticks yourself. How cool is that?

The Best Lacrosse Stick You’ll Ever Have

The overarching concept here is progressively improve your game stick, and to find the perfect pocket to suit your style of play. You start with whatever stick you have now, and ask yourself ONE question. Don’t worry, there will be more questions later.

Questions #1 – Does this stick allow me to do everything I want do as a player?

You are asking if the stick allows you to make every pass you need to make. You need to think about how the pocket works with ground balls, shooting, catching, and cradling. Think about how your stick functions in the rain, and the cold, or even extreme heat. Ask yourself about when you pick up your stick, does it need to be constantly fine-tuned, or is it good to go every time? The key here is confidence. Do you feel confident in your stick (apart from your skill set) when you have to perform a lacrosse action with it under pressure? Once you have thought about all that, then you can answer the original bolded question.

If the answer isn’t “Yes, this is the BEST lacrosse stick for me“, then your journey starts now. Very few people will be able to answer that way, so don’t feel bad. It’s all part of the process, and it can help you become a much improved player.

Now that you have admitted that your current stick isn’t perfect, it’s time to figure out what’s wrong with it. This is where playing with other sticks comes into play. When you shoot around with friends, trade sticks. First, it allows you to try a different set up or head. That’s always good, but there is also a hidden benefit here. By using a foreign stick, you will need to focus on fundamentals more, and that is always good for your game!

Once you have done this a couple times, and used a number of different sticks, you need to ask yourself another question:

Question #2 – Did I prefer any of my friends sticks over my own in the sense that they helped me answer YES to Question #1?

As long as your friends’ sticks were legal, and you answer YES to Question #2, you now know you need a new game stick officially. This does not mean you need to go out and buy a new stick (although you could). The best bet is to ask your friend where he got his stick, and see if they can restring your stick to be like his. Or maybe your friend strings sticks (stick stringers often have great sticks, duh), or maybe YOU string sticks. I don’t know, but figure it out! Find a way to get your friend’s pocket replicated in your stick. Use the same kind of mesh, same shooters, etc. Try to recreate their pocket in your stick.

Give this new pocket some time, and work with it. Keep an open mind, make sure you put in the extra practice to get your body mechanics fully adjusted. Once you have given this new stick some time, ask yourself Question #1 again. If the answer is still NO, find some new sticks to try.

Now, if NONE of your friends’ sticks were an improvement from your own. you may need to try something very different, and quite frankly, a little more risky, at least on the short-term. This is also true for people who have switched to a new stick, but still aren’t fully satisfied with the pocket.

A total restring is going to be required here, and if you can’t string your own sticks, you’re going to need to know what you like in a pocket, so you can explain what you want to someone else. Even if you do know how to string, you’re going to need to know what you want to do before you do it, right? So here is Question #3, which is really more like Questions #3-10, but whatever. Deep breaths. This is going to be a lot.

Question(s) #3 – The Nitty Gritty

Do you like hard mesh, soft mesh, or traditional? Which brand or type do you prefer? WHY? You need to know this answer first because you can not string if you don’t have materials, and all materials are NOT created equal. Hopefully, in your testing of friends sticks, you tried many different types of pockets AND mesh/traditional. Which did you like the best? This will affect release, channel, feel, and some many other important aspects of your game. This is not a decision to be taken lightly. Don’t buy into any one brand’s marketing. Buy into what you have used and enjoyed using. Period.

Do you like whip? Do you like hold? Do you like both? Neither? Don’t just answer with a robotic, 5 whip, 10 hold either. Think about what YOU really want and need to be a complete player. Maybe 1 out of 10 guys in college plays with a lot of whip. Are you really in that 10%? I’m only using whip as an example, but think about what you really need, not what you think you need, if that makes sense.

Do you want a high pocket? Mid? Low? Maybe an “all over” pocket? If those four terms are foreign to you, you need to play with more different sticks! Where do you cradle the ball? How do you shoot most often? Can you hit corners on command? Do your passes hit the ground sometimes? How did pocket placement impact any of the above and more? What position do you play? Does that matter? Some people say D-men should have a high pocket. Others argue for a low pocket. When I played D, I used a mid pocket. So what actually WORKS FOR YOU? That is much more important than what someone else says should work for you. Know thy own lacrosse needs!

Once you have figured out all of the above, string (or have someone else string) what you think will be your ideal pocket, but DO NOT PUT SHOOTERS IN!!!!! Take the stick outside, and play wall ball with it for 20 minutes. If at any point you can not throw hard, accurate passes with your shooter-less stick, then this is NOT the pocket for you. Shooting strings are a final touch, and if you need them to make your stick work, then your stick really doesn’t work. Maybe some college players or pros can get away with this, MAYBE, but it is doubtful. Your stick really should function pretty darn well without any shooters in it at all.

Of course I don’t expect your shooter-less pocket to be perfect (although it might be!), so if you want a little bit more tug, or pull, when you shoot, throw a tight high shooter into the stick. Maybe you want a lot more hold. Ok, throw three shooters in. Maybe you want more shooters because it will look better… STOP RIGHT THERE. Shooters are to be used for function only. If you use them to look cool or “normal” you are defeating the entire purpose of this exercise.

At this point, a couple of months have now passed, and you are likely using a totally different stick from the one you started out with. Now it’s time to start the cycle again… Does this stick allow me to do everything I want do as a player? If the answer is no, it’s time to start all over again.

At this point, I’m sure at least a couple of readers out there are asking, “what about that whole ‘stick finding you thing’? where does that come in?“, and it’s a fair question. A stick can find you at any time, and you need to be ready for this as well.

Let’s say you have a Warrior Evo, strung up with fancypants mesh, dyed to be the coolest, that your uncle got you for your birthday. Let’s also say that the stick just does not work for you. You need to find something for you, that works. And your friend has a back up stick. It’s an STX AV8, and the mesh in there is soft old mesh. You pick up the AV8 and it just works for you. The pocket is right, the feel is there. For some reason, it just clicks for you. Are you going to find a way to use that AV8? Or are you going to stick with the high end Evo? Seemingly this is an easy choice, but many people would actually stick with the Evo, and let their game suffer.

At the end of the day, it’s all just plastic and nylon, so don’t get too attached to the name or look of a product, and care only about how it performs… for YOU. Other kids hate the AV8? Well, you just scored 4 goals and led your team to victory, so what do they really know?

Another example of a stick finding you is even more random. You ask a kid at camp to string you a stick and it comes out weird a little ugly, but it somehow works. Do you restring the stick to make it pretty? Or do you leave it the way it is, because it works?

Or how about deciding that a certain type of head is your favorite head before you’ve used it, or before you’ve used another option? If your favorite head is a Clutch, but the best pocket you’ll ever have is in a Torque, what do you do? Do you stick to brand allegiance over functionality? The same can be said for a brand of mesh, or sidewall strings, or shooters. If you don’t keep an open mind, focused simply on what works, your stick will likely never find you, and if you want to find your stick, it will require a lot more work, likely with less payoff.

I believe that playing lacrosse with multiple sticks will make you a smarter, more skilled, more fundamentally sound player. I also believe that finding “your stick” can help elevate your play in games, as it increases confidence and ability. In order to truly find the latter, employ the former.

Old Wooden Goalie Stick – Traditional Thursday

$
0
0
old wooden goalie stick

This week I fix up an Old Wooden Goalie Stick. Welcome to Traditional Thursday! It’s an old Bacharach Rasin wooden goalie stick… I think!

I picked up this old goalie stick a while ago, but I was waiting around for some interesting leathers before I strung it up. I found some nice 36″ long “Redhawk” leathers from Stringer’s Shack, and I was ready to roll. Of course I also needed a spool of crosselace, and a spool of shooting string, because who doesn’t? Stringer’s Shack has great stuff (and their mesh costs under $6 – it’s awesome) and they make it all in the USA. I’m a big fan.

lacrosse stringing products

Old Wooden Goalie Stick

This old wooden goalie stick doesn’t actually have a label on it, so that makes it harder to identify. However, I’m willing to bet it is a Bacharach Rasin stick, from their old store in Towson, MD. Here is why I believe this: A) It looks like a B-R stick in general. 2) It was in a box with other B-R sticks and looked very similar in cut, shape, wood type and grain, and size. At the end of the day, I can’t be sure, but sometimes that’s just as close as you can come. It’s irrelevant, the stick is a keeper.

old wooden goalie stick

There is a crack on the corner, and almost every old wooden goalie stick that has been used will have a crack there. It isn’t too bad on this stick, but it will require a new wrap with tape. The shaft is also cracked, likely from being banged on the goal pipes, but with a little more athletic tape, this will be a non-issue.

The first thing I’ll do is cut the old pocket out. I will leave the tops of the leathers in place, both where they run through the wood, and where they run through the original gut shooters. I will leave the gut in place as this gut is 100% salvagable, and take out all of the other strings, pieces of leather, etc. I will also leave the original gut ball stop at the bottom. It is also in great shape.

Once I have removed everything I’m going to remove from the old wooden goalie stick, I wet a soft cloth with warm water, and run the stick with the cloth. This cleans up the dust, but doesn’t remove the wear and patina that the stick has accumulated over its life. Sometimes I sand a stick down, but I’m leaving this one as-is. I love a beat up goalie stick. The wood cleans up nicely, and much of its former glory is quickly restored with a solid wash and cloth treatment. Add a little soap to the water to remove some extra grime, then cloth it with water again, and dry the stick completely. Do not soak old sticks in water. That can lead to damage and further warping.

Next I will put in my new leathers. I will first removed the old leather from the wooden hole, and put my new leather in place. Once it is locked down, I will removed the old leather from the gut shooter, and quickly slide the new leather through in its place. I do this quickly before the gut shooter tightens up and I can’t get a new leather through. Once I repeat this for all six leathers, I attach the bottom of the leathers to the wood, using the top 6 of the bottom 8 holes.

Then I will use the bottom two holes I left open to re-attach the gutwall to the wood frame. You can use leather to do this, or as I did here, you can use sidewall or some other type of string. Then I put in the sidewall in a traditional way (going up, then looping back down and tying off), and I am ready to start the crosslace.

Old sticks are single string, so I do that here. I cut a long piece of crosslace (5 full arm lengths at least) and get started. The hardest thing here is keeping the crosslace from twisting and/or kinking. After 4-5 knots, I typically work all the kinks out of my super long piece of crosslace. Then I do 4-5 more knots, repeat… you get the idea. It takes extra time but makes a big difference in final appearance and your overall tension.

Finally, I throw one “cotton” (it’s not all cotton, but it’s soft like cotton!) shooter in and this bad boy is ready to go. It’s all cleaned up, restrung with good diamond size and tension, has fresh tape, and would be good to hit the field, if only it were 1967!

old wooden goalie stick

If you have tips you want to share on wooden lacrosse stick refurb projects, drop them in the comments below!

Here is a link to our Traditional Thursday Archives! Plenty of fun stuff in there! Spend some time, wander around, and learn the art of traditional, or just improve your trad game.

New Hybrid Pocket: Traditional Thursday

$
0
0
new_hybrid_pocket

I came up with a new hybrid pocket (or at least what I think is a new hybrid pocket) by combining different elements from a couple traditional variations. This pocket uses two leathers, four pieces of sidewall, two 10 foot sections of crosslace, one 6 foot section of crosslace, and 3 shooting strings.

The pocket combines elements from a standard traditional (there are four runners in this pocket), a Pita pocket (the center track), a Shook Shakedown (the long weaving crosslace and shooting strings), and to some extent, a six shooter (the side runners are synthetic, and snug the pocket inwards). This pocket was also inspired by the interesting traditional pocket that Gary Gait was using in Hawaii this year.

By taking some of the best attributes from each of these pockets, I came up with this new hybrid pocket, which may or may not have been done already. Who knows? Lots of people string sticks out there! Since I haven’t seen it before, I’m calling it new.

New Hybrid Pocket

two_leather_traditional

I started out by putting in the two leathers as the middle runners, but attached them to the throat using the outer two throat holes. Then I put in two pieces of sidewall as the outer runners, finishing them off on the bottom sidewall hole. I then put in my sidewalls with 7 loops, starting on the second hole down from the top and finishing on the third hole from the bottom.

The next step is using the two long pieces of crosslace to weave back and forth to create the main structure of the pocket. I start at the top sidewall holes and weave one piece of crosslace over, then under, then over, then under the four runners. I then connect it to the sidewall, and I keep the string loose. I then use the other piece of crosslace to wrap around the first piece, making sure to go over a runner wherever I went under with the first piece of crosslace. Once I have one coil done across the head, I pull it tight to create even tension and looping across the head. Taking your time with this is the biggest key to having a great pocket of this kind. You will finish on the open second to last sidewall hole.

new_hybrid_pocket

Notice in the pictures how different numbers of coils are used in different places.

To see how I do this for yourself, check out this years-old two leather traditional tutorial. It still gets the job done, but production value is a little low! Oh well, I’d rather be smart than pretty. Still working on the smart thing…

Check out the LaxAllStars YouTube Channel for more videos on stringing!

I would also recommend using a TradiTree for this pocket if you can. It will really help, especially if this is your first time trying it. Overall, the new hyrbid pocket I created is very similar to the pocket tutorial above. That pocket was originally designed for Brendan Shook, a player at Hopkins, and the OG tutorial can be found HERE. This is all Pat Miller’s work, so I take very little credit for my tweaks! He’s an old school pocket genius, what more can I say?

After I finish the coils across the whole head, I will now put in a Pita Pocket center twist, but since there is nothing to interlock with on the coils, I will put in a knot above and below each coil, to keep them in their place. I’ll tie each piece off on one of the leathers, then tie them together at the bottom.

pita_variant

After I put in my rolled shooters (using the coil as a guide), I’m good to go!

The sidewall runners (#1 and #4) can be tightened up to help snug the ball in the middle. They add extra pinch and feel to the pocket, without making it stiffer, like additional leather would do. The Pita center track keeps the leathers together, which creates a consistent ramp for the ball to roll on for crisp passes and shots, and a consistent throw. Each coil almost acts as a shooter as well, so the ball sits nicely all over, and you have good hold without any of the whip.

Overall I like the adjustments I’ve made to this original Shook Shakedown. I hope Pat Miller is out there somewhere, and pleased. I’d like to thank him for his awesome original gift to the stringing community!


String League – Season 2 – It’s Preseason!

$
0
0
string league season 2

Editor’s Note: Welcome to String League, Season 2! Much of the cast is back from Season 1, the competitions are going to be better than ever, and the prizes will be awesome, but are you good enough to win them? We are excited to partner up with String League directly and host this competition here on LaxAllStars.com, so let’s get rolling with the Preseason. You need to get into form!

String League, Season 2

We have gathered some of the best stringing minds the game has to offer to show you some new tricks. String League Preseason is your chance to polish your stringing skills before the annual worldwide stringing tournament begins in February.

The tutorial series below pulls together some high level stringing concepts from Connor / Laxallstars.com, Greg / East Coast Dyes, Joe / Throne of String, and Skaggs / Stylin
Strings.

season 2

Each stringer will tackle a different section of the head, explaining the pros, cons, and theory as they go along. Each host will take extra time to explain what they are doing, why, and how it will affect your end result. If you can replicate this pocket you will be able to say that you have learned some advanced stringing methods.

The end result may not be a pocket you prefer, but the skills incorporated in the pocket can be utilized in all of your projects to bring your stringing game to the next level. String League Season 2 starts February 2nd. Get ready to string it up!

How to string a sustainable LACROSSE POCKET & TOP STRING theory

by Connor – LaxAllstars – String League Preseason tutorial

How to CHANNEL a LACROSSE POCKET & Side wall theory

by Joe – Throne of String – String League Preseason tutorial

by Skaggs – Stylin Strings – String League Preseason tutorial

How to string LEAGAL SHOOTING STRINGS in a lacrosse pocket & WHIP theory

by Greg – East Coast Dyes – String League Preseason tutorial

Tune in to LaxAllStars.com/string-league all season long, and get ready for greatness!

Wood Stick Wednesday: Thompson & Sons

$
0
0
wood_stick_wednesday

Welcome to Wood Stick Wednesday! For our first post in this ongoing series, we take a look at wooden sticks made by Thompson & Sons Lacrosse Company. There will be a lot more wooden stick talk on Wednesdays moving forward, and we’ll be talking about lots of different stick makers over the course of the year!

Thompson & Sons is run by Mike Thompson out of Akwesasne and he does the carving of the sticks. As a player, Thompson has played in the NLL, for the Iroquois Nationals (most recently at the 2015 WILC), and has two Mann Cups to his name from his time with the Peterborough Lakers. Mike also makes an incredible wooden lacrosse stick!thompson & sons lacrosse

I saw my first stick from Thompson at the Iroquois Nationals open tryouts this past year. You could immediately tell that it was a nice stick, and that Mike was putting a lot of time into each one. Mike said he had a couple on the rack then, so he would have more ready soon. I told him I was interested and Mike agreed to sell me a couple sticks.

When the two sticks I ordered (one field, one box) arrived, I knew immediately that I’d made the right call in ordering them. They were perfect! I only get to keep one of them (the other goes to Ben Kaminow), but just holding them both was nice enough.

thompson & sons lacrosse

Thompson & Sons Wooden Lacrosse Sticks

Both sticks have a thicker, more rectangular lower end to the shaft. As you get higher on the shaft, it narrows, and becomes more rounded. The wood on both sticks has also been sanded down to a perfectly smooth level, and the light yellow coloration of the wood really shows nicely, as does the grain patterning. The heads of both sticks are also thicker than the shafts, and this not only gives the sticks a good weight and feel, but it also creates an almost offset quality to the sticks.

thompson & sons lacrosse

Both scoops are rounded, and about as far from “flat” as you can get, and both scoops follow the grain perfectly. The balance is also exceptional to both sticks, and a thicker end to the “crook” helps with this. The pockets are all black leather and crosslace numbers, and the stringing is impeccable. The field stick has an open channel down the middle, while the box stick is a standard traditional pocket. I love how Thompson anchors the bottom of the leathers with a short piece of shooting string on both sticks. It’s an awesome touch!

IMG_6031

Thompson has a great stamp mark, and he signs the inside of his sticks with his name and a #66, which he wears out on the floor. On the outside of the stick, Thompson has gone with an old school black ink branding, which states the maker name and point of origin. It gives the stick an old Etienne-Martin feel to it, and I’m a big fan.

IMG_6026

thompson & sons lacrosse

While the sticks only came with two shooting strings (one thick lace and one cotton shooter), I added two more cotton shooters in, using the same style as Mike Thompson.

thompson & sons lacrosse

Thompson & Sons Lacrosse Company wooden sticks are the real deal. Mike carves and strings a beautiful stick, and for anyone who is a serious collector or wooden stick enthusiast, a Thompson & Sons wooden lacrosse stick is a must have. I’ve seen a lot of good lacrosse sticks over the years, but these are truly great. Welcome to the wooden stick game, Mike Thompson, you’re a player already!

For more on what Thompson & Sons could offer you (sticks, refurbishing, stringing, and more!), check out their website, which is pretty, informative, and excellent!

How To String: Native American Sidewall

$
0
0
native american sidewall

A classic and long standing pattern of traditional lacrosse pocket sidewall construction is the Native American Sidewall Structure, which is often referred to as the Double Sidewall. When constructing a traditional pocket there are many sidewall options to choose from, and we really like this one. As with most aspects of stringing, the options for variation are only limited by your creativity!

This method results in two sidewall strings running along each of the head’s sidewalls. This gives more
durability to the pocket and can extend its life span. Structurally speaking, it allows the stringer to affect how sturdy the connection points where the outer channel is locked off to the sidewall. Stringers can lace the cross lace through both strings, resulting in more rigidity and a stiffer and more secure segment of the pocket. This is useful in the top 3rd of the pocket where you want the slope of the channel to hold its shape and remain dependable. This will affect the release of the ball, and minimize adjustments.

 Double Sidewall.

Stringers can also string the sweet spot of the pocket through only the “outer side wall string” which will result in additional slack. This concept parallels doubling (the action of stringing two diamonds of a mesh pocket into one open sidewall segment to create additional slack) in modern mesh pockets. When a pocket has a strategically placed weak point, the ball will naturally settle there. Additionally, a stringer can lace a larger portion of the outer channel to only the outer string to create a “sway” in their pocket.

Native American Sidewall Tutorial Video

Check out Stylin Strings and LaxAllStars on YouTube!

This looser pocket will swing back and forth more freely than what may be considered standard. There are endless customization options when stringing traditional pockets and only a few of them were mentioned in this article. Utilizing a Native American or Double Sidewall Structure will be a very useful tool in your attempt to master traditional lacrosse pocket stringing.

Wood Stick Wednesday: Mohawk Manufacturing Company

$
0
0
wood_stick_wednesday

The Mohawk Manufacturing Company was a huge name in lacrosse back when wooden sticks were the only available option, and over 40 years ago you could buy one in a hardware store for about $8 pretty much anywhere in Quebec or Ontario. At their peak, the Mohawk Manufacturing Company was making tens of thousands of sticks every year out of Cornwall Island, and many great players used one of these at some point in their career, usually when they were kids.

IMG_6036

The sticks were made starting in 1972, when Frank Benedict purchased an old factory and started mass producing wooden lacrosse sticks. This was also around the time that John Wesley Patterson started making sticks out of Tuscarora, and it was a booming time for wooden stick makers across a couple of native nations.

(Check out last week’s Wood Stick Wednesday post on Mike Thompson‘s new wooden sticks!)

The only problem with all this demand for wooden sticks was that it meant that sticks often needed to be mass-produced, and volume was valued heavily. So some of the old Mohawk sticks out there are just brutal because of the passage of time, while others just weren’t that great to begin with. That being said, if you do find a Mohawk Manufacturing Company stick that is in good condition, hang on to it, because it’s a truly wonderful piece of history, and a nice basic stick from our collective past.

mohawk manufacturing company

It may sound like I am bashing larger runs of wooden stick production, but it’s just a reality that when volume goes way up, quality control tends to go down at least a bit. It’s seemingly inevitable. When you’re competing for the title of “really nice stick” with guys who produce only a couple hundred per year (or less), you can see why mass produced sticks can have their issues, at least in comparison.

The Mohawk stick that I got (a gift from Lee Southren, who got it from a friend) is a really nice one. While it’s been played with a lot, the original gut is still good to go, stiff, and well-formed. I only had to flatten it once, and it stayed flat, which was exciting. The scoop also shows little to no signs of cracking anywhere, and that is a straight up miracle. This stick has a kids name scratched into it, and has been sitting in a garage for decades, and there are no cracks? What are the chances…

mohawk manufacturing company

The pocket was totally shot however, and the leathers could be ripped apart by hand. The crosslace used to be twine, but that was also pretty much destroyed. I put in long black leathers, and used yellow and orange string to finish it off with a high-count diamond pocket. The original gut shooter was also good to go (and probably helped the stick from warping too much over time), so I put the leathers back through it, and use it as my “lip” to throw off. As you can see below, this stick is actually quite accurate. My accuracy is another matter.

One important note about Mohawk Manufacturing Company sticks is that they are NOT the same as today’s Mohawk sticks. Today’s Mohawk brand sticks are made by Mohawk International Lacrosse, which is a totally different thing. We will talk about their great sticks in a future post.

mohawk manufacturing company

Mohawk Manufacturing Company sticks are not the “nicest” sticks in the world, nor are they super rare. However, if you can find a nice one, it is a must-add item for any collector based on its importance to the game alone. Just think of how many people used one of these in decades past… the number could be well over 100-200,000 people. That’s crazy for a wooden stick company!

mohawk manufacturing company

The other reason you’ll want a MMC stick is because they are actually quite nice, and basic. They are typically thinly carved, light, and great for kids. They have a bigger face area than a lot of other box sticks, and take a nice pocket if you want to re-string one for yourself. The side sticker is classic, and while I prefer an ink stamp, or a brand, I don’t mind a sticker telling me I’m special.

mohawk manufacturing company

Thanks for reading, keep the wood tradition alive!

NEW – Pre-Season String League Contest #2

$
0
0
string league contest #2

String League Pre-season rolls on with Contest #2! There are three Pre-season String League contest chances in total, so get involved, and get ready for the ultimate in stringing league competition!

February 2nd is only a few months away, and since the SL season kicks off on that date, we’re offering prospectives stringing pros the chance to get in a little training and learn the String League ropes.

String League Contest #2

The String League judges are expecting to see some next level stringing this year so we put together a set of tutorials for you to up your game. This Preseason Tournament is the second of three that will lead up to the main event, and it is all about stringing a perfectly perfect mesh pocket.

We want everyone out there to incorporate at least ONE technique from each of the FOUR video tutorials. You can watch the video tutorials HERE, but you do NOT need to remake the exact pocket.

We do not hope to see exact replicas, although those entries will be considered.

Enter your pocket to Instagram with the tag #stringleague between Friday the 27th of November and Wednesday the 2nd of December!

The top three will be announced on the @stringleague Instragram account on Thursday, December 3rd, and left up to a vote!

The winner gets a $100.00 gift card to www.StylinStrings.com!

Congrats to Preseason Tournament 1 winner… MCLAXSTRINGS!

59714d1d-991b-436a-8d2d-d8c561c99117

Make sure you all check out last years String League Season 1 winner @Lacrosseman at the convention this year! He does amazing work and you can see it all in person this year at #LaxCon! @Lacrosseman set a really high bar, so we’re excited to see someone try to match, or exceed, his high standard!

Viewing all 230 articles
Browse latest View live